1.Programming and coding of basic software for MCU and VCU of new energy and assisting the project manager to carry out the project development

2.Participating in the overall planning and implementation of software development and solving the technical problems in the project

3.Compiling the detailed design document and related technical documents of module

4.Maintaining the software module code developed

5.Participation in the R&D training pertinent to R&D department

6.Completion of the work assigned by the superior

7.Cooperation on the pertinent work with other departments

8.Keep confidentiality of relevant work content

1.Bachelor degree or above in automatic control, computer, vehicle, mechanical or electronic or related major. More than 5-year experience in same industry, more than 3-year experience in technical development and more than 2-year experience in similar position;

2.Familiar with the principle of embedded operating system

3.Familiar with the operation of common MCU, such as, Freescale and Infineon;

4.Familiar with the development of fault diagnosis agreement for CAN-bus drive, IO drive, CCP, xCP and UDS

5.Understanding related knowledge for AUTOSAR, complicated drive and ISO26262

6.Proficiency in the C language skills and understand the fundamentals of compiling

7.With good ability of communication, coordination, learning, innovation and language performance and strong sense of responsibility and execution.

Immediate delivery

1.Be responsible for the development of hardware platform for MCU, VCU and DCDC of new energy and conducting the scheme determination by combining the hardware system design and key module

2.Be responsible for the schematic diagram of hardware, PCB design and the management of related documents

3.Be responsible for the selection of brand, model and specification for electronic components

4.Be responsible for the hardware debugging, performance test and improvement during each phase of development

5.To solve the major and difficult problems during the development and production process in a timely manner

6.Participation in the R&D training pertinent to R&D department

7.Completion of the work assigned by the superior

8.Cooperation on the pertinent work with other departments

9.Keep confidentiality of relevant work content

1.Bachelor degree or above in power electronics, electrical and electrical appliances, electrical engineering and automation and other related major. More than 5-year experience in hybrid/electric vehicle control development, the experience in major engine plants is preferred; more than 5-year experience in same industry, technical development or similar position;

2.Proficiency in design of analog circuit and digital circuit

3.Excelling in making use of AD or other hardware design software

4.Have strong practical ability and can operate experimental equipment like oscilloscope, signal generator and power supply

5.Proactive, hardworking and with good communication skills and team spirit

6.With good ability of communication, coordination, learning, innovation and language performance and strong sense of responsibility and execution.

7.Obedience of company’s regulations

Immediate delivery

1.The application layer software development and control algorithm design for new energy vehicle controller

2.Be responsible for the test and algorithm improvement of the software module integration on the application layer of vehicle controller

3.Design and support the build-up of experimental platform and verify the function algorithm and performance

4.Be responsible for the compiling of corresponding module design documents, coding for software functional module, unit test and code test;

5.Design and maintenance for software function change

6.Construction and optimization of software platform

7.Participation in the R&D training pertinent to R&D department

1.Educational background: Bachelor degree or above, automation and other related major

2.Skills: More than 3-year experience in same industry/similar position, with good ability of communication, coordination, learning, innovation and language performance.

3.With strong sense of responsibility and execution.

4.Others: C1 driving license holder 

Immediate delivery

1.Software development for new energy motor controller application layer and motor control algorithm design

2.Be responsible for the test and algorithm improvement of the software module integration on the application layer of motor controller

3.Design and support the build-up of experimental platform and verify the function algorithm and performance

4.Be responsible for the compiling of corresponding module design documents, coding for software functional module, unit test and code test;

5.Design and maintenance for software function change

6.Construction and optimization of software platform

7.Participation in the R&D training pertinent to R&D department

8.Completion of the work assigned by the superior

1.Bachelor degree or above in power electronics and power transmission, mechatronics, automation, motor control or related major. More than 5-year experience in same industry, more than 3-year experience in technical development and more than 2-year experience in similar position;

2.Excelling in the development of motor drive control algorithms like DC, BLDC and PMSM;

3.Excelling in the development of motor control algorithms

4.Proficiency in FOC and square wave control algorithm and understanding of noninductive FOC control algorithm;

5.Familiar with SCM principle and the calibration method for automotive electronics

6.With good ability of communication, coordination, learning, innovation and language performance and strong sense of responsibility and execution.

Immediate delivery

1.Be responsible for formulating the technical scheme for VCU products of new energy vehicles and conducting the feasible research and analysis;

2.Be responsible for the hardware design and review for VCU products of new energy vehicles, including design of schematic diagram, PCB design, component selection design, weak current wiring harness design as well as the establishment and maintenance of BOM

3.Be responsible for the compiling and review of technical document (technical scheme, network development plan, technical conditions, debugging rules, technical specifications, design specifications, procedures, FMEA and etc.)

4.Working together with software engineer to conduct the software debugging and the joint debugging for software and hardware;

5.Be responsible for the research on the new technology, new structure and new process and take charge for the compiling of technical documents for inventions and patent for utility models; 

6.Be responsible for analyzing, identifying and circumventing risks so as to lower down development cost and improve efficiency;

7.Be responsible for the electrical principle design and simulation analysis of VCU

8.Completion of the work assigned by the superior

1.Bachelor degree or above in power electronics, electrical and electrical appliances, electrical engineering and automation and other related major. More than 5-year experience in hybrid/electric vehicle control development, the experience in major engine plants is preferred; more than 5-year experience in same industry, more than 3-year experience in technical development and more than 2-year experience in similar position;

2.Excelling in the functions of vehicle control system, the interactive relationship of functions for VCU and other controller and the underlying software and hardware principle for VCU. 

3.Proficiency in development of vehicle control strategy for new energy pure electric, hybrid and fuel cell power system

4.With good communication ability, studious, strong sense of responsibility and professional dedication

Immediate delivery

1.Be responsible for the PCB design and modification of drive board and control board for motor controller

2.Be responsible for the fabrication and maintenance of packaging library and standard wiring module for SCH and PCB

3.Participating in the PCB design review and submitting the review suggestions

4.Be responsible for the follow-up of PCB making and SMT process; working closely with relative departments and suppliers to solve related problems

5.Be responsible for the update and maintenance of checking list for SCH and PCB

6.Be responsible for compiling the design specification for SCH and PCB

7.Completing the PCB Layout revision according to the requirements of hardware engineer, EMC engineer and structural engineer.

8.Completion of the work assigned by the superior

1.Bachelor degree or above in power electronics, electrical and electrical appliances, electrical engineering and automation and other related major. More than 5-year experience in same industry, more than 3-year experience in technical development and more than 2-year experience in similar position;

2.With certain understanding about electronic circuits and electronic components and familiar with the production, process and procedure of electronics products;

3.Excelling in the schematic diagram and PCB design software and familiar with the electromagnetic compatibility design of electronic products

4.The PCB design experience in frequency converter, servo driver and inverter is preferred

Immediate delivery

1.Be responsible for formulating the design and development procedure of ECU hardware

2.Be responsible for compiling the design, test specification and standard for ECU hardware

3.Be responsible for the design review for each phase of ECU hardware

4.Be responsible for the review checklist catalogue and related requirements of ECU hardware

5.Be responsible for the implementation and review of project scheme for hardware design team

6.Be responsible for hardware quality rectification reason and formulation of rectification plan

7.Be responsible for the design and development of special hardware platform and compiling of hardware design scheme

8.Be responsible for the formulation of input and output technical data for hardware design

9.Participating in the performance appraisal of hardware design team

1.Bachelor degree or above, majoring in communication, electronics, automation and related

2.More than 10-year hardware design and development experience in ST/Freescal 32-digit series Single-Chip Microcomputer (SCM) and be able to lead in the development procedure of new product and the specification formulation of hardware design verification standard independently

3.Proficiency in kernel structure and underlying driver programming of ST/Freescale 32-digit SCM and development and debugging of peripheral module driver like FLASH, SPI, I2C, CAN and MSC

4.Rich experience in development of analog and digital circuits. Proficiency in PCB design software. Rich experience in PCB design for 4 layers and above. Familiar with simulation software and with good ability of circuit analysis. Be able to analyze problems and put forward solutions independently

5.Familiar with automotive electronics related EMI/EMC test standard like EMS/TCU/VCU. Rich experience in PCB-layout batch engineering design and rectification and electromagnetic interference shielding design.

Immediate delivery

1.The operation and management of test bench

2.Assist test engineers and development engineers to conduct development testing

3.Be responsible for the testing of prototype for market and development 

4.Conduct the pilot run according to the scheme provided by test engineers and development engineers

5.Maintenance of experimental facilities

6.Assist engineers to restructure the vehicles and install the sample piece

7.Completion of the work assigned by the superior

1.Bachelor degree or above in automation or related major. 2-year experience in same industry or 1-year experience in similar position.

2.Proficiency in the general principle of MCU, GCU and VCU, understanding of the testing and operation method of corresponding bench

3.With electrician certificate and related professional knowledge of electrical, proficiency in using multimeter and electric soldering iron

4. Keep confidentiality for company’s technical secrets and other confidential matters

5. Obedience of company’s regulations

6. With good ability of communication, coordination, learning, innovation and language performance and strong sense of responsibility and execution.

Immediate delivery